R & D

R & D

Technical book

Technical book

Thanks to our extensive track record data accumulated over many years and our specialist documents on mixing that integrate our laboratory's research results, many people have read our books and we feel a high interest in mixing. We will be happy if this document can be useful in the field of mixing in the future. This technical document is sold by Satake.

If you wish to purchase a copy, please apply using the specification form from the inquiry form button. Please enter "Request for purchase of technical document" as the inquiry content.

Contact

Chapter 1 What is mixing?
  • 1・1 What is mixing?
  • 1・2 Mixer
Chapter 2 Fundamentals of mixing
  • 2・1 Fluid flow and mixing action in the mixing tank
  • 2・1・1 Flow and mixing action
  • 2・1・2 Liquid flow mechanism in the mixing tank
  • 2・1・3 Liquid flow characteristics of mixers
  • 2・1・4 Data on the flow of liquids in the mixing tank
  • 2・1・5 Mixing of non-Newtonian fluids
  • 2・2 Mixing operation theories
  • 2・2・1 Mixing of homogeneous phase liquid systems
  • 2・2・2 Mixing of solid-liquid systems
  • 2・2・3 Mixing of gas-liquid and liquid-liquid systems
  • 2・2・4 Heat transfer of mixing tanks
  • 2・2・5 Mixing of reaction systems
Chapter 3 Study on mixing operation
  • 3・1 Mixing tank turbulent flow and aspect of blending research / Yoichi Nagase
  • 3・2 Liquid flow near the blades in turbulent state / Masafumi Mochizuki
  • 3・3 Blending / mixing of highly viscous liquids / Mitsuo Kamiwano
  • 3・4 Kneading, mixing / Yasuhiro Murakami
  • 3・5 Mixing of solid-liquid, gas-solid-liquid systems / Koji Takahashi
  • 3・6 Mixing of gas-liquid systems / Kazumi Sato
  • 3・7 Performance of Scaba-SRGT blades in gas-liquid mixing / Fumio Saito / A.W. Nienow
  • 3・8 Diameter of dispersed droplets in a liquid-liquid mixing tank / Mikio Konno, Shozaburo Saito
  • 3・9 Heat transfer mixing / Setsuro Hiraoka
  • 3・10 Crystallization operation and mixing / Ken Toyokura
  • 3・11 Scale-up of mixing tanks / Masafumi Nishikawa
  • 3・12 Recommendation for systematization of liquid mixing technology / Koji Takahashi
  • 3・13 Regarding scale up of mixing tank type gas-liquid contact devices / Kazumi Sato
  • 3・14 Regarding handling method of laminar flow mixing heat transfer / Shozaburo Saito
  • 3・15 Impressions on mixing research / Setsuro Hiraoka
  • 3・16 Flow analysis and computers / Toshio Kobayashi
Chapter 4 Power required for mixing
  • 4・1 About Nagata type
  • 4・2 About actual measurement value of power number Np
Chapter 5 Mixing Equipment
  • 5・1 Dynamic elements (mixer structure and structural elements)
  • 5・2 Static elements
Chapter 6 Selection method of mixers
  • 6・1 About selection method
  • 6・2 Scale-up method
Chapter 7 Structural design of mixers
  • 7・1 Drive
  • 7・2 Shaft and shaft support
  • 7・3 Shaft seal
  • 7・4 Mixing blade
  • 7・5 Tip bearing
  • 7・6 Vibration of mixers
Chapter 8 Maintenance
  • 8・1 Installation
  • 8・2 Commissioning
  • 8・3 Maintenance
  • 8・4 Storage
  • 8・5 Disassembly and Assembly
  • 8・6 Examples of problems


Appendix (total 633 pages)