It is a type of mixer that can mix by attaching the main unit of the mixer to the upper edge of a mixing tank or a stand, etc. by clamping (vise).

It is a type of mixer where the main unit of the mixer is fixed to the top of the mixing tank (flange mounting). A seal mechanism such as gland packing can be provided in the shaft penetrating part.

There is an EG mixer which uses a 60 W motor.

Please contact our sales staff. The shaft dimensions can be changed up to the "B-MAX (Option)" dimension which is indicated in the catalog.

Yes. Please contact our sales staff. "I" at the end of the model represents "Inverter compliant". There is also a portable mixer A720-□BX, which is made up of an integrated inverter and main unit.

Yes. The "Increased Safety Explosion-Proof Type" and "Pressure-Resistant Explosion-Proof Type" are available, so please specify the type you require.

It is a mixer with "S" attached at the end of model. PSE mark indication for electrical goods is mandated according to the Electrical Appliances and Materials Safety Act enforced on April 1, 2001. In accordance with the Act, we include overload protection devices, switches and power cords with the products, and manufacture and sell them with the PSE mark attached. For details, please see the options on the website or the "Portable Mixer, A Series" catalog.

Stainless steel (SUS 304, SUS 316) is available as standard. We also offer buffing (~#400) and rubber lining, etc. Please indicate the specification you require. (Please contact us for the delivery date separately.)

Yes. There are suitable mixers for the stands and tanks. Please confirm in the catalog or contact our sales staff.

We only sell parts to customers who are using Satake products. (Note: Please be aware that we do not supply parts for the EG mixer.) If you are not using a Satake mixer, please understand that it is not possible to purchase parts only, because it is outside the scope of the warranty.

If you are not using a Satake mixer, we can not guarantee safety, so please understand that we do not allow attachment of a Satake impeller to another company's mixer.

They are shipped from the Tokyo factory in Toda City, Saitama.

All Satake's mixers are made to order. We do not have stock. Thank you for your understanding.

A large rotational force occurs momentarily at startup, so it is very dangerous and the Portable Mixer cannot be used in this way. Please be aware that we do not offer hand mixers that can be held manually.

Neither the Portable Mixer nor the Multi A Mixer can be operated idle or passing through the liquid level. It is absolutely not permitted to do so because the shaft will vibrate, etc. and cause damage to the device.

It is possible, but only limited impellers are allowed. Please contact our sales staff.

The range of mixing capacity and viscosity graphs described in the catalog is possible with one stage. Adjustment of the blade diameter is required when specially preparing a two-stage impeller. Please contact us.

We will check your location and introduce your local distributor.