This mixer is very suitable for mixing applications that require strong shear-force, as well as for absorbing dissolving powder after forcing the powder into a liquid that draws in other substances.

• 0.065-1.5kW  Number of revolutions: 50Hz 1450min^-1
• 0.065-1.5kW  Number of revolutions: 60Hz 1750min^-1

Suited for small- to mid-capacity mixing work. This is the ideal mixer for mixing, diluting and heat transmission of general soluble liquids and other liquids as well as for mixing, breaking down and preventing sedimentation of easier-to-dissolve solids and liquids.

0.065-1.5kW  Number of revolutions: 50Hz /60Hz 360min^-1

This is optimum for mixing relatively viscous liquids with other liquids exhibiting similar properties, and also for the kind of mixing in which generation of foam must be avoided.

• 0.1-0.75kW  Number of revolutions: 50Hz 150min^-1
• 0.1-0.75kW  Number of revolutions: 60Hz 180min^-1

This mixer prevents over-mixing or under-mixing since it can handle change in fluid viscosity. Setting it to a lower speed can enable the safe implement of operations such as lowering of the fluid level and discharge of fluid.

0.06-0.75kW  Number of revolutions: 50Hz/60Hz 0-420min^-1

Comes equipped with an air motor drive-based safe explosion-proof structure. A wide range of revolution speeds are attainable from low to high speeds, ensuring work safety even when overloaded.

0.06-0.75kW  Number of revolutions: 50Hz/60Hz 200-360min^-1

Using this model makes it unnecessary to secure the inverter installation locations, and the revolution speed can be easily adjusted from the mixer body. High-speed, mid-speed and low-speed models are available.

• A510 0.2-0.75kW  Number of revolutions: 50Hz/60Hz 175-1750min^-1
• A520 0.2-0.75kW  Number of revolutions: 50Hz/60Hz 36-360min^-1
• A540 0.1-0.75kW  Number of revolutions: 50Hz/60Hz 18-180min^-1

The stainless steel used in this mixer body prevents commingling of rust and coating film making it suitable for applications in the fine chemical, pharmaceutical and food sectors.

0.2kW  Number of revolutions: 50Hz/60Hz 360min^-1

This mixer can be installed directly on the chime block of the steel drum of the "JIS Z1601-1 type (200L)". Impeller blades are especially designed to spread out when the shaft begins rotating. The impeller employed is the high-performance K02 type.

• 0.1-0.4kW  Number of revolutions: 50Hz 1450min^-1
• 0.1-0.4kW  Number of revolutions: 60Hz 1750min^-1

A thermal protector, power switch and power cord are set on the motor as standard equipment. These protect the motor from burnout related to overloading and other causes. Connecting the grounded outlet to the power supply can operate (start and stop) the mixer easier. The Multi A-Mixer type is also available.

Portable mixers

• A510 0.065-0.4kW  Number of revolutions: 50Hz 1450min^-1
• A510 0.065-0.4kW  Number of revolutions: 60Hz 1750min^-1
• A520 0.065-0.4kW  Number of revolutions: 50Hz/60Hz 360min^-1 (6P:240min^-1)
• A540 0.1-0.4kW  Number of revolutions: 50Hz 150min^-1
• A540 0.1-0.4kW  Number of revolutions: 60Hz 180min^-1
• AD510 0.1-0.4kW  Number of revolutions: 50Hz 1450min^-1
• AD510 0.1-0.4kW  Number of revolutions: 60Hz 1750min^-1

Multi A Mixers

• AD 0.1-0.4kW  Number of revolutions: 50Hz 150min^-1
• AD 0.1-0.4kW  Number of revolutions: 60Hz 180min^-1
• AG 0.065-0.4kW  Number of revolutions: 50Hz/60Hz 360min^-1(6P:240min^-1)